Home  >  ODN & FTTx Cabling Products  >  FTTx Solution - Connectivity  >  Connectors

DIN Connector

All components of/and the final product are designed and tested to conform the requirements of IEC60874-7, CECC 86115-801, Bellcore/Telcordia GR-326, EIA/TIA 604-3A, EIA/TIA 568, ISO /IEC 118012nd Ed., EN 50173, JIS C5973 F04, ICEA-596, IEC60793-2-10 A1a, ITU-T G.651 or IEC60793-2-10A1b or ITU-T G.652 (depending on fiber), Belcore/Telcordia GR-409-CORE, IEC 793, IEC 794-1-E1, IEC 794-1-E3, UL1666/901 (UL-cable) and EIA/TIA455


• Corrosion resistant body

• Boots in a variety of colors

• Free-floating ceramic ferrule

• Low insertion loss and back reflection loss



• Active device termination

• Telecommunication networks

• Metro

• Local Area Networks (LANs)

• Data processing networks

• Test equipment

• Premise installations

• Wide Area Networks (WANs)


• The connector can be supplied as a pre-assembled one-piece connector or as connector kits.

• Housing kits without ferrule are available.

• DIN/APC connector available

Single modeMultimode
Insertion Loss<0.30dB<0.30dB
Return Loss≥50 dB (PC) ; ≥60 dB (APC)
Durability0.1 dB typical change, 500 matings
Operating Temperature-40 to + 85°C-40 to + 85°C
Ferrule Hole Sizes125.0+1/-0μm, Concentricity: ≤1.0μm127μm, Concentricity: ≤3μm
125.5+1/-0μm, Concentricity: ≤1.0μm144μm, Concentricity: ≤3.0μm
126.0+1/-0μm, Concentricity: ≤1.0μm